| |
|
|
|
|
|
| |
Introduction：
Ruth IP-II Water-base/ Oil-base Polyurethane Water-stopper is a macromolecule
chemical injection water-stop material made from TDI and multi-hydroxide
polymer aether. It can stop the water leaking in the building at once,
can be widely used on: Subway Station、Tunnel、Culvert、Foundation Improvement、Soil
Settlement、Reservoir、Port Project、Top Slab、Crack、Construction Join、Shrinkage
Crack、Basement hairline crack etc. water stop projects.
|
| |
| Item |
Index |
| Water-base |
Oil-base |
| Appearance |
Transparent
maple liquid |
Transparent
brown liquid |
| Density
(g/cm3 25℃±0.5℃) |
0.98-1.10 |
1.02-1.10 |
| Viscidity
(Mpa.S 25℃±0.5℃) |
60-200 |
300-600 |
| Solidification
Time (S) |
10－1300 |
| Expand
Rate( %≥) |
350 |
1000-2000 |
|
|
Characteristics：
1、 It’s highly hydrophilic, when it meets with water, it will
have polymeric reaction at once, expand and become hard with
the sands and clay in the wall, thus plug up the crack permanently
and reach water stop effect surely.
2、 The solidify time can be controlled from several seconds
to several minutes.
3、 High rate of expansion, good tenacity, low shrink, strong
adhesive power with the base material, and suitable for different
water resource.
4、 Can be applied in low temperature environment.
5、 Single component material, easy construction, easy clean.
Safety caution matters:
1. During application please wear protection apparatus〔ex. Glove、goggle〕，avoid
to direct contact to skin，if happen please use running water
to flush，if contacted to eyes need to go to hospital for medicate
care immediately.
2. This product is solvent based material，during application
needs to have well ventilation and away from any fire sources.
Before material dried，around construction area do not spark
any fire.
3. Machine after used needs to use cleaner to clean up thoroughly.
Storage：
Store indoors where has good ventilation, keep away from fire
and sunlight. Using time is 6 months in the original package.
Package：
Metal pail，20KG（5gallon）/pail.
|
 |
 |
|
|
|
|
